If you are an avid Cool Cat fan, you probably have the Cool Cat Tree Plans Ideas. I have used them myself and have nothing but good things to say about them.
In order to use these plans, you will need to purchase some metal sheets that are about three inches long. This is a great way to save money because these sheets are much cheaper than purchasing the actual Cool Cat Trunks and the accessories.
Now, that you have all of the materials needed for building the Cool Cat Tree, the next step is to get your garage or shed ready for it. In order to cut the metal sheets to the correct length, you can use a power saw or a few hand tools if you don’t have one of those.
If you would like, you can use a circular saw if you have access to a circular saw and it is safe to use on metal. You should also make sure that the hole in your garage or shed is large enough for the cutting of the metal sheets. There is no point in putting a tree up if you do not have enough room to put it up.
To build the Cool Cat Tree, you will first need to lay out the two smaller metal sheets that will be used to support the Cool Cat Trunk. This is easy to do because there are several guides available that will show you exactly how to do this.
Next, place a sheet in the middle of the two smaller sheets and cut the top off of one of the sheets. You should make sure that the top of the sheet matches the top of the longer sheet and that there is a flat spot on both sides. The bottom of the sheet should be approximately twice as big as the top of the longer sheet.
Cut out the top of the sheet and then stick this sheet onto the longer sheet. Now you have completed the first of the Cool Cat Tree Plans Ideas.
Now that you have the cutting and placing of the second Cool Cat Tree, you can get out the power saw and cut out the trunks. If you have more than one trunk, it may be a good idea to cut out more than one tree at a time. It will make the job easier later on.